With its temperature range of 9°-15°C this wine cabinet is ideal for maturing your wine.
This model is from Première range by EuroCave : .
";" - Function : maturing
- Number of temperatures: : single temperature
- Size : Large model
- Colour of cabinet body : Nero
- Type of door: Glass, black frame
You can equip it with storage shelves or sliding shelves fitted with Main du sommelier supports. It has a maximum capacity of 234 bottles with 2 storage shelves.
Choose your interior layout :
- Access Pack is made up of 3 storage shelves and 1 sliding shelve and allows you to store 213 bottles;
- Premium Pack is made up of 14 sliding shelves and allows you to store 182 bottles
It is possible to buy additional shelves or display shelves individually.
The advantages of the Première range :
";Clean lines and reliability are the keywords for this range of maturing cabinets which places all of the emphasis on content. The cabinets are easy to use and their understated, simple design enhances the appearance of your bottles. They observe to the letter all of the criteria essential for optimal wine maturing, found in a natural cellar: a constant temperature and thermal insulation, suitable humidity, protection against vibrations, constant ventilation.
Storage and preservation advice...
Did you know? All wines mature at the same temperature, whether underground or in an electric wine cabinet.
Maturing cabinets EuroCave reproduces all of the criteria required for effectively maturing wines, in this way recreating, on a smaller scale, the ideal storage conditions found in a natural cellar. 5 criteria are essential for a wine to reach its full potential:
A constant temperature - For optimal wine maturing, it is necessary to have a stable temperature of 10°C - 14°C, whatever the external temperature is.
Suitable humidity levels - It is essential to maintain suitable humidity levels, between 50 and 80%. The ideal humidity level is 50 - 80%. Below 50%, the cork could dry out causing the wine to leech out. Above 80%, condensation could appear on the bottles and the labels could peel off. Mould may even develop if there is insufficient air circulation.
Ideal ventilation - it is essential to ensure there is sufficient air circulation or mould and bacteria could develop.
Maximum protection from light - For optimal maturation, wine must be protected from all sources of light: only darkness prevents the deterioration of tannins by oxidation. Direct sunlight containing UV rays causes irreparable damage to wine. Indirect light is also harmful. In the long term, it can break down the structure of the wine and dilute it.
Absence of vibrations - In order to mature in optimal conditions, wine must be protected from vibrations, which break down the molecules of some of wine's chemical compounds.
Flush-fitting conditions for this cabinet
This cabinet is not specifically designed to be flush-fitted, it does not correspond to the standard dimensions of flush-fitting furniture and it is not ventilated at the front. It is therefore necessary to follow these precise installation criteria to make flush-fitting possible and guarantee the durability of the cabinet. (Ask your EuroCave advisor for flush-fitting instructions if necessary)
The chosen location of your cabinet must be open to the outside in order to ensure sufficient air circulation (not in an enclosed cupboard...), not too damp (linen room, laundry room, bathroom...), have a flat stable floor and it must have an electricity supply (standard socket, 16 A, earthed with circuit breaker, 30 mA*).
Take the power lead (located in the "accessories" packet of your cabinet) and plug it into the connector, located at the bottom left-hand side of the back of the cabinet. Wait 48hrs before plugging in the cabinet after transportation.
Fit the stopper (located in the accessories packet) at the back of the cabinet. This allows you to maintain a space of 7 cm between the wall and the back of the cabinet. This space optimises your cabinet's power consumption. Place the 2 caps in the 2 holes of the top of the cabinet. Do not push the caps all the way in, in order to allow installation of the back stopper. Slide the back stopper between the caps and the wall of the cabinet, then push the 2 caps all the way in.
|Dimensions H x W x D (mm)||1825x680x690|
|Cabinet body colour||Nero|
|Type of product||Wine cabinets|
|Warranty||2 years parts|
|Number of temperatures||1 temperature|
|Handle type||Right or left|
|Door details||Glass with black frame|
|Door opening direction||Right or left|
|Layout packs offered||Access pack (storage and sliding shelves) & Premium pack (sliding shelves only)|
|Access pack capacity||Storage shelves x 3 + sliding shelf x 1|
|Premium pack capacity||182 bottles|
|Type of interior lighting||Removable, white lighting|
|Interior equipment recommended for maximum capacity||Storage shelves x 3|
|Contents of Access pack||Storage shelves x 3 + sliding shelf x 1|
|Premium pack contents||Sliding shelves x 14|
|Maximum capacity||234 bottles|
|Adjustment of the feet||Yes|
|Temperature setting range||0-30°C|
|Can be fitted||No|
|Temperature display type||LCD screen with touch-sensitive keys|
|Recommended ambient temperature range||Yes - 2 adjustable feet|
|Can be flush-fitted||Observe flush-fitting specificities|
|Type(s) of alarm(s)||Visual and audible alarm in case of temperature disfunctioning|
|Air vacuum system||9°-15°C|
|Type of control||Electronic|
|Insulation Hot-cold technology|
|External covering||HDF (High Density Fibre) melamine-faced panels|
|Type of insulation||Polyurethane (PU) foam|
|Warm air production technology||Heater|
|Internal walls||Stucco aluminium sheet|
|Cold air production technology||Static cold air - compressor|
|Heat activation technology||Automatic - Threshold : adjustable|
|Annual energy consumption Aec* (KWh/year)||165|
|Energy efficiency class||A|
|Useful volume (litres)||460|
|Sound emission||37 dB(A)|
|Catégorie du modèle||SN|