Wine Maturing cabinet, Medium-sized model, Première range


Wine cabinet 1 temperature, Nero color, Glass, red frame door

With its temperature range of9°-15°C this wine cabinet is ideal for maturing your wine.
This model is from Première range by EuroCave : .

";" - Function : maturing
- Number of temperatures: : single temperature
- Size :Medium-sized model
- Colour of cabinet body : Nero
- Type of door: Glass, red frame

You can equip it with storage shelves or sliding shelves fitted with Main du sommelier supports. It has a maximum capacity of 169 bottles with 3 storage shelves and one sliding shelves.

More details

The Wine cabinet

Choose your interior layout :
- Access Pack is made up of 3 storage shelves and 1 sliding shelve and allows you to store 169 bottles;
- Premium Pack is made up of 10 sliding shelves and allows you to store 141 bottles
It is possible to buy additional shelves or display shelves individually.

The advantages of the Première range :
";Clean lines and reliability are the keywords for this range of maturing cabinets which places all of the emphasis on content. The cabinets are easy to use and their understated, simple design enhances the appearance of your bottles. They observe to the letter all of the criteria essential for optimal wine maturing, found in a natural cellar: a constant temperature and thermal insulation, suitable humidity, protection against vibrations, constant ventilation.

Storage advice

Storage and preservation advice...

Did you know? All wines mature at the same temperature, whether underground or in an electric wine cabinet.

Maturing cabinets EuroCave reproduces all of the criteria required for effectively maturing wines, in this way recreating, on a smaller scale, the ideal storage conditions found in a natural cellar. 5 criteria are essential for a wine to reach its full potential:

A constant temperature - For optimal wine maturing, it is necessary to have a stable temperature of 10°C - 14°C, whatever the external temperature is.
Suitable humidity levels - It is essential to maintain suitable humidity levels, between 50 and 80%. The ideal humidity level is 50 - 80%. Below 50%, the cork could dry out causing the wine to leech out. Above 80%, condensation could appear on the bottles and the labels could peel off. Mould may even develop if there is insufficient air circulation.
Ideal ventilation - it is essential to ensure there is sufficient air circulation or mould and bacteria could develop.
Maximum protection from light - For optimal maturation, wine must be protected from all sources of light: only darkness prevents the deterioration of tannins by oxidation. Direct sunlight containing UV rays causes irreparable damage to wine. Indirect light is also harmful. In the long term, it can break down the structure of the wine and dilute it.
Absence of vibrations - In order to mature in optimal conditions, wine must be protected from vibrations, which break down the molecules of some of wine's chemical compounds.

Flush-fitting criteria

Flush-fitting conditions for this cabinet

This cabinet is not specifically designed to be flush-fitted, it does not correspond to the standard dimensions of flush-fitting furniture and it is not ventilated at the front. It is therefore necessary to follow these precise installation criteria to make flush-fitting possible and guarantee the durability of the cabinet. (Ask your EuroCave advisor for flush-fitting instructions if necessary)
The chosen location of your cabinet must be open to the outside in order to ensure sufficient air circulation (not in an enclosed cupboard...), not too damp (linen room, laundry room, bathroom...), have a flat stable floor and it must have an electricity supply (standard socket, 16 A, earthed with circuit breaker, 30 mA*).
Take the power lead (located in the "accessories" packet of your cabinet) and plug it into the connector, located at the bottom left-hand side of the back of the cabinet. Wait 48hrs before plugging in the cabinet after transportation.
Fit the stopper (located in the accessories packet) at the back of the cabinet. This allows you to maintain a space of 7 cm between the wall and the back of the cabinet. This space optimises your cabinet's power consumption. Place the 2 caps in the 2 holes of the top of the cabinet. Do not push the caps all the way in, in order to allow installation of the back stopper. Slide the back stopper between the caps and the wall of the cabinet, then push the 2 caps all the way in.

Data sheet

Main features
Item code V-Prem-M
Type of product Wine cabinets
Warranty 2 years parts
Number of temperatures 1 temperature
Size Medium-sized model
Dimensions H x W x D (mm) 1480x680x690
Function(s) Maturing
Cabinet body colour Nero
Range Première
Door features
Door details Glass with red frame
Door opening direction Right or left
Door type Glass
Reversible door yes
Handle type Right or left
Interior layout
Premium pack capacity 141 bottles
Type of interior lighting Removable, white lighting
Interior equipment recommended for maximum capacity 168 bottles
Contents of Access pack Storage shelves x 3 + sliding shelf x 1
Shelf front Beech
Premium pack contents Sliding shelves x 10
Maximum capacity 169 bouteilles
Internal lighting Yes
Layout packs offered Access pack (storage and sliding shelves) & Premium pack (sliding shelves only)
Access pack capacity 169 bouteilles
Specific features
Temperature display type LCD screen with touch-sensitive keys
Charcoal filter Yes
Humidity management No
Recommended ambient temperature range Yes - 2 adjustable feet
Can be flush-fitted Observe flush-fitting specificities
Type(s) of alarm(s) Alarme visuelle et sonore : défaut de température
Air vacuum system 9°-15°C
Weight (kg) 79
Type of control Electronic
Adjustment of the feet Yes
Alarm(s) Yes
Humidity display No
Temperature setting range 0-30°C
Can be fitted No
Insulation Hot-cold technology
Coolant R600a
Internal walls Stucco aluminium sheet
Cold air production technology Static cold air - compressor
Heat activation technology Automatic - Threshold : adjustable
Automatic defrosting Yes
External covering HDF (High Density Fibre) melamine-faced panels
Type of insulation Polyurethane (PU) foam
Warm air production technology Heater
Energy class
Climate class SN
Useful volume (litres) 355
Sound emission 37 dB(A)
Catégorie du modèle SN
Annual energy consumption Aec* (KWh/year) 157
Energy efficiency class A

Related articles on blog

Contact us

2 year guarantee
Quality control on every product
Designed and manufactured in France