Wine Serving cabinets, Medium-sized model , Pure range

The Wine cabinet

Choose your interior layout :
- The Access pack is made up of 2 Storage shelves + 2 sliding shelves and allows you to store 177 bottles;
- The Premium Pack is made up of 10 Sliding shelves and allows you to store 141 bottles
It is possible to buy additional shelves or display shelves individually.

SEE PURE SHELVES

The advantages of the Pure range:
The evocative and symbolic name given to all of the cabinets in this range. Cabinets devised and designed, down to the last detail, to store your bottles in the best possible conditions, reduce energy consumption and contribute to caring for the environment. The Pure range is based on the desire to create a new generation of cabinets which represent a return to our roots, a clever combination of advanced technology and environmentally-friendly features. Within the elegant, clean lines of the cabinets, your wines are stored in conditions in which they can reach their full potential, protected from variations in temperature and humidity, U.V. light and vibration...

Serving Advice

This wine cabinet is a wine Serving cabinet.

Wine serving cabinets bring wines to an ideal serving temperature. Cabinets with several temperature zones allow you to store several types of wine in them.

Indeed, temperature is a key element when serving and tasting wines.  A few degrees too high or too low prevents a great vintage from fully expressing itself!   A wine that is too cold will not reveal its aromas to the nose; if too warm it will appear to be too alcoholic.  When in the mouth, a wine served at an incorrect temperature will not reveal the entire palette of its flavours.

Did you know ? The ice bucket is perfect to keep the wine’s serving temperature during the meal or the tasting. However you do not refresh a wine with it, otherwise the drop in temperature will damage the flavours of your wine.

Wines & Temperatures

White wine serving Temperatures
-7-8°C : Simple Champagnes et sparkling wines, muscats, simple syrupy wines
- 9-10°C : Alsace late-harvest, sweet wines, light or acidic dry white wines
- 11-12°C : Dry white wines, medium-dry white wines (Vouvray, Pinot gris d'Alsace), Gewurztraminer, fine Champagnes, fine syrupy wines, Noble Grapes
- 13-14°C : High quality dry white wines, Vin Jaune and other oxidative styled wines
- 15-16°C : Aged wines

Rosé wine Temperatures
- 7-8°C : Simple rosé Champagnes and other sparkling rosés
- 9-10°C : Light rosés, quaffing wines
- 11-12°C Fine rosé champagnes, classic rosé wines
- 13-14°C :Bordeaux clarets, structured rosé wines, Burgundy rosés

Red wine Temperatures
- 11 - 12°C : light and fruity red wines
- 13 - 14°C : Beaujolais and low tannic wines, Banyuls and other Vin Doux Naturel
- 15 - 16°C : Burgundies, Rhône, Loire and medium-bodied red wines
- 17 - 18°C : Bordeaux and all the red wines with a good structure, Ports
- 19 - 20°C : Exceptional, developed wines

Flush-fitting criteria

Flush-fitting conditions for this cabinet

This cabinet is not specifically designed to be flush-fitted, it does not correspond to the standard dimensions of flush-fitting furniture and it is not ventilated at the front. It is therefore necessary to follow these precise installation criteria to make flush-fitting possible and guarantee the durability of the cabinet. (Ask your EuroCave advisor for flush-fitting instructions if necessary)
The chosen location of your cabinet must be open to the outside in order to ensure sufficient air circulation (not in an enclosed cupboard...), not too damp (linen room, laundry room, bathroom...), have a flat stable floor and it must have an electricity supply (standard socket, 16 A, earthed with circuit breaker, 30 mA*).
Take the power lead (located in the "accessories" packet of your cabinet) and plug it into the connector, located at the bottom left-hand side of the back of the cabinet. Wait 48hrs before plugging in the cabinet after transportation.
Fit the stopper (located in the accessories packet) at the back of the cabinet. This allows you to maintain a space of 7 cm between the wall and the back of the cabinet. This space optimises your cabinet's power consumption. Place the 2 caps in the 2 holes of the top of the cabinet. Do not push the caps all the way in, in order to allow installation of the back stopper. Slide the back stopper between the caps and the wall of the cabinet, then push the 2 caps all the way in.