Wine Maturing cabinet, Large model, Première range


Wine cabinet 1 temperature, Nero color, Solid, black frame door

With its temperature range of 9°-15°C this wine cabinet is ideal for maturing your wine.
This model is from Première range by EuroCave : .

";" - Function : maturing
- Number of temperatures: single temperature
- Size : Large Model
- Colour of cabinet body : Nero
- Type of door: Solid, black frame

You can equip it with storage shelves or sliding shelves fitted with Main du sommelier supports. It has a maximum capacity of 234 bottles with 2 storage shelves.

More details

The Wine cabinet

Choose your interior layout :
- Access Pack is made up of 3 storage shelves and 1 sliding shelve and allows you to store 213 bottles;
- Premium Pack is made up of 14 sliding shelves and allows you to store 182 bottles


It is possible to buy additional shelves or display shelves individually.

The advantages of the Première range :
";Clean lines and reliability are the keywords for this range of maturing cabinets which places all of the emphasis on content. The cabinets are easy to use and their understated, simple design enhances the appearance of your bottles. They observe to the letter all of the criteria essential for optimal wine maturing, found in a natural cellar: a constant temperature and thermal insulation, suitable humidity, protection against vibrations, constant ventilation.

Storage advice

Storage and preservation advice...

Did you know? All wines mature at the same temperature, whether underground or in an electric wine cabinet.

Maturing cabinets EuroCave reproduces all of the criteria required for effectively maturing wines, in this way recreating, on a smaller scale, the ideal storage conditions found in a natural cellar. 5 criteria are essential for a wine to reach its full potential:

A constant temperature - For optimal wine maturing, it is necessary to have a stable temperature of 10°C - 14°C, whatever the external temperature is.
Suitable humidity levels - It is essential to maintain suitable humidity levels, between 50 and 80%. The ideal humidity level is 50 - 80%. Below 50%, the cork could dry out causing the wine to leech out. Above 80%, condensation could appear on the bottles and the labels could peel off. Mould may even develop if there is insufficient air circulation.
Ideal ventilation - it is essential to ensure there is sufficient air circulation or mould and bacteria could develop.
Maximum protection from light - For optimal maturation, wine must be protected from all sources of light: only darkness prevents the deterioration of tannins by oxidation. Direct sunlight containing UV rays causes irreparable damage to wine. Indirect light is also harmful. In the long term, it can break down the structure of the wine and dilute it.
Absence of vibrations - In order to mature in optimal conditions, wine must be protected from vibrations, which break down the molecules of some of wine's chemical compounds.

Flush-fitting criteria

Flush-fitting conditions for this cabinet

This cabinet is not specifically designed to be flush-fitted, it does not correspond to the standard dimensions of flush-fitting furniture and it is not ventilated at the front. It is therefore necessary to follow these precise installation criteria to make flush-fitting possible and guarantee the durability of the cabinet. (Ask your EuroCave advisor for flush-fitting instructions if necessary)
The chosen location of your cabinet must be open to the outside in order to ensure sufficient air circulation (not in an enclosed cupboard...), not too damp (linen room, laundry room, bathroom...), have a flat stable floor and it must have an electricity supply (standard socket, 16 A, earthed with circuit breaker, 30 mA*).
Take the power lead (located in the "accessories" packet of your cabinet) and plug it into the connector, located at the bottom left-hand side of the back of the cabinet. Wait 48hrs before plugging in the cabinet after transportation.
Fit the stopper (located in the accessories packet) at the back of the cabinet. This allows you to maintain a space of 7 cm between the wall and the back of the cabinet. This space optimises your cabinet's power consumption. Place the 2 caps in the 2 holes of the top of the cabinet. Do not push the caps all the way in, in order to allow installation of the back stopper. Slide the back stopper between the caps and the wall of the cabinet, then push the 2 caps all the way in.

Similar Products

  • Wine cabinet 1 temperature - Nero color - Solid, high gloss black (solid glass with reflective black finish) door With its temperature range of 10°-14°C, this wine cabinet is ideal for maturing your wine. This model is from the Pure range by EuroCave: a range of wine cabinets with low energy consumption, which contributes to caring for the...

  • Wine cabinet 1 temperature, Nero color, Solid, red frame door With its temperature range of 9°-15°C this wine cabinet is ideal for maturing your wine. This model is from Première range by EuroCave : .";" - Function : maturing - Number of temperatures: : single temperature - Size : Large model - Colour of cabinet body : Nero - Type of...

Data sheet

Main features
Dimensions H x W x D (mm)1825x680x690
Cabinet body colourNero
Item codeV-Prem-L
Type of productWine cabinets
Availability of spare parts11 years from the date of manufacture of the product (information on the wine cabinet label).
Warranty2 years parts
Number of temperatures1 temperature
SizeLarge model
Door features
Handle typeHandle integrated into the doorframe
Door detailsSolid with black frame
Door opening directionRight or left
Door typeSolid
Reversible doorYes
Interior layout
Access pack capacity213 bottles
Premium pack capacity182 bottles
Interior equipment recommended for maximum capacityStorage shelves x 3
Contents of Access packStorage shelves x 3 + sliding shelf x 1
Premium pack contentsSliding shelves x 14
Maximum capacity234 bottles
Internal lightingYes
Shelves frontBeech
Layout packs offeredAccess pack (storage and sliding shelves) & Premium pack (sliding shelves only)
Specific features
Temperature setting range9°-15°C
Weight (kg)78
Type of regulationElectronic
Humidity displayNo
Recommended ambient temperature range0-35°C
Can be fittedNo. This appliance is not designed to be used as a built-in appliance.
Temperature display typeLCD screen with touch-sensitive keys
Charcoal filterYes
Type(s) of alarm(s)Visual and audible alarm in case of temperature disfunctioning
Humidity measurementNo
Adjustment of the feetYes - 2 adjustable feet in the front
Insulation Hot-cold technology
Type of insulationPolyurethane (PU) foam
Cold air production technologyStatic cold air - compressor
External coveringHDF (High Density Fibre) melamine-faced panels
Internal wallsStucco aluminium sheet
Heat activation technologyAutomatic - Threshold : adjustable
Automatic defrostingYes
Energy class
Climate classSN
Useful volume (litres)460
Sound emission (dB(A))37
Model categorySN
Annual energy consumption Aec* (KWh/year)128
Energy efficiency classA+

Related articles on blog

Contact us

2 year guarantee
Quality control on every product
Designed and manufactured in France